Kyla

Owners who are using wood burning must learn and practice the techniques required to ensure efficient operation.

By mastering the techniques described below, you will succeed:

• Reduce the amount of wood needed to heat your home
• Reduce indoor and outdoor pollution caused by wood smoke
• Lower frequency of sweepings
• Increase the benefits and pleasure of wood heating
• The fundamental principles governing the combustion of wood.

On Burning Firewood Undergoes Three Transformations:

Evaporation of water - up to ½ the weight of the freshly cut log is none other than water. After sufficient drying, the water content lessens to about 20%. As the wood log is heated in the combustion chamber, the water evaporated while using thermal energy.

More wood is wet, the longer it takes heat energy to evaporate the water. That is why the wood wet heating whistles, crackles and burns easily, while well seasoned wood like tørt brænde catches fire and burns readily.

The smoke - When the temperature of the wood rises above the boiling point of water, it starts to smoke. Smoke is a concrete sign of the decomposition of solid wood which vaporizes into a smoke of combustible gases and tar droplets. The smoke itself burns through a sufficiently high temperature and presence of oxygen.

When the smoke burns, it produces brilliant flames associated with burning wood. However, the smoke does not burn in the combustion chamber exit from the apparatus to be found in the flue pipe and chimney, where it condenses and forms creosote or escapes into the atmosphere form of pollution.

Unburned smoke represents a loss of efficiency as containing a large part of the total energy supplied by the wood. Advanced combustion installations are designed to blaze the smoke earlier than it leaves the stove, so that's one of the reasons why they are more effective than the old facilities.

Charring – Gradually, as the fire progresses and the greater part of the gas and tar evaporate from the wood, leaving only coal. Coal is composed almost entirely of carbon it produces a red glow burning and a little flame or smoke when it has sufficient oxygen. Charcoal is a first-class fuel that burns easily.

However, the combustion of coal often produces carbon monoxide, an interior of which is harmful air pollutant. In these advanced models, not only the combustion is better and cleaner, but the flame looks better, which represents a significant advantage and it is better if you could check more guidelines on dkbrænde.