holzher
03-23-2011, 07:11 PM
The CUT 85 and CUT 110 are always the best possible decision you can make, if it is about effective, tear-free cutting of a wide range of materials. The different lengths and widths will serve all cutting needs.
http://www.holzher.de/assets/Produkte/DBS/SAEGE_CUT_85_110_WEISS.jpg
With the CUT 85 and CUT 110 constant precise cutting results are a matter of course. This is ensured by various components, for example the massive support frame. The section design and bridge offer maximum rigidity to ensure reliable dimensional accuracy on a long-term basis as well.
The heart of the CUT 85 and CUT 110 is the 11 kW sawing unit, which is accompanied by the dust extraction unit. It runs in surface-hardened linear guides. The drive is via rack-and-pinion with a feed of up to 100 m/min. The rollers of the side pressure unit, which constantly press the workpiece against the stop, and the welded bridge design round off the picture of an extremely stable cutting machine which offers maximum precision step by step. Incorrect cutting or postmachining are ruled out.
http://www.holzher.de/assets/Produkte/DBS/SAEGE_CUT_85_110_WEISS.jpg
With the CUT 85 and CUT 110 constant precise cutting results are a matter of course. This is ensured by various components, for example the massive support frame. The section design and bridge offer maximum rigidity to ensure reliable dimensional accuracy on a long-term basis as well.
The heart of the CUT 85 and CUT 110 is the 11 kW sawing unit, which is accompanied by the dust extraction unit. It runs in surface-hardened linear guides. The drive is via rack-and-pinion with a feed of up to 100 m/min. The rollers of the side pressure unit, which constantly press the workpiece against the stop, and the welded bridge design round off the picture of an extremely stable cutting machine which offers maximum precision step by step. Incorrect cutting or postmachining are ruled out.